Water Purification

Home  ›  Skills  ›  Water Purification
Water Purification

You can only survive about three days without water, less if you are trying to survive in a hot climate. You can find a lot of clean water around that’s not pure. Purified water is water without having anything living in it. Such as bacteria, protozoa and other microorganisms that can cause serious health problems. Drinking impure water can literally be deadly. It can cause diarrhea and vomiting, even that can be enough to kill you if you get dehydrated. In a survival situation, all water should be considered to be contaminated water. It must be properly purified to ensure that it doesn’t have any of those little critters living in it.

Water Filters. Mechanical filters are probably the most common form of water purification used. Not only can they clean out any microorganisms, but they can also get rid of all the sediment that makes the water cloudy. There are a couple of companies that manufacture high quality filters which are back-flushable. That means that clean water can be run backwards through the filter, under pressure, to clean the filter out. These types of filters can be used to filter as much as a million gallons of water before they need to be replaced. Safety is worth the price. I have found a great product I really like, AquaSticq – water filter. You can check them out here, and get yours now.

While there are many ways to purify water, they aren’t all uniformly effective. Some are better suited for use at home, while others would be more effective in the wilderness. Since purified water is such an important part of survival, it is highly recommended that you have more than one method available, both in your at-home survival supply kit,in your bug-out bag, your car, and at work.

In an emergency situation where regular water service has been interrupted – like a hurricane, flood, or water pipe breakage – local authorities may recommend using only bottled water, boiled water, or disinfected water. ONLY USE WATER THAT HAS BEEN PROPERLY DISINFECTED FOR DRINKING, COOKING, MAKING ANY PREPARED DRINK, WASHING DISHES, AND FOR BRUSHING TEETH.

Use bottled water or water you have properly prepared and stored as an emergency water supply until regular water service is restored. Boil water, if you do not have bottled water. Boiling is sufficient to kill pathogenic bacteria, viruses and protozoa. Try to start with the cleanest water you can; you may need to filter it before you boil it. Example: clean cloth, coffee filter, paper towels. In addition to these methods, there are a few things that can be done to make this process easier. Moving water is usually a better source than stationary, as it tends to remove the scummy top layer that can form on ponds and pools. It is also still deemed a safe practice to drink water directly from a spring head. This is the place the spring first bubbles up from the ground. Boiling or disinfection will not destroy other contaminants, such as heavy metals, salts, and other chemicals. You can get your AquaStiq here: Save27% Plus You even get a useful bonus  when you order!

Using household Bleach.

You can use household liquid bleach to kill microorganisms. Use only regular household liquid bleach that contains 5.25 to 6.0 percent sodium hypochlorite. Do not use scented bleaches, color safe bleaches or bleaches with added cleaners. Because the potency of bleach diminishes with time, use bleach from a newly opened or unopened bottle.

Use (1/8 teaspoon) liquid bleach per gallon of water, stir and let stand for 30 minutes. The water should have a slight bleach odor. If it doesn’t, then repeat the dosage one more time and let stand another 15 minutes. If it still does not smell of chlorine, discard it and find another source of water. While boiling and chlorination will kill most microbes in water, distillation will remove microbes and germs that resist these methods, as well as heavy metals, salts and most other chemicals.

 

Distillation. The very best way to have the safest water is by far.

This is the basic explanation; Distillation involves boiling water and then collection of only the vapor that condenses. The condensed vapor will not include salt or most other impurities. To distill, fill a pot halfway with water. Tie a cup to the handle on the pot’s lid so that the cup will hang right-side-up when the lid is upside-down (make sure the cup is not dangling into the water) and boil the water for 20 minutes. The water that drips from the lid into the cup is distilled.

Several companies make chemical purification tablets. The most common of these uses the chemical halogen. While effective, the tablets leave a bad taste in the water. They are also only effective as long as your supply of tablets lasts. Other chemicals, such as iodine or water treatment products sold in camping or surplus stores that DO NOT contain 5.25 or 6.0 percent sodium hypochlorite as the only active ingredient, are not recommended and should not be used. You should always have more than one option for water to stay hydrated, I recommend  AquaStiq™ Water filter for 27% off retail price.  Plus your bonus! 

          Be safe, take care, CJ.